Impact of Pyrolysis Temperature on the Physical and Chemical Properties of Non-Modified Biochar Produced from Banana Leaves A Case Study on Ammonium Ion Adsorption /

Given the current importance of using biochar for water treatment, it is important to study the physical–chemical properties to predict the behavior of the biochar adsorbent in contact with adsorbates. In the present research, the physical and chemical characteristics of three types of biochar deriv...

Teljes leírás

Elmentve itt :
Bibliográfiai részletek
Szerzők: Pantoja Alvarez Fernanda Liceth
Beszédes Sándor
Gyulavári Tamás
Nyergesné Illés Erzsébet
Kozma Gábor
László Zsuzsanna
Dokumentumtípus: Cikk
Megjelent: 2024
Sorozat:MATERIALS 17 No. 13
Tárgyszavak:
doi:10.3390/ma17133180

mtmt:35090806
Online Access:http://publicatio.bibl.u-szeged.hu/38855
Leíró adatok
Tartalmi kivonat:Given the current importance of using biochar for water treatment, it is important to study the physical–chemical properties to predict the behavior of the biochar adsorbent in contact with adsorbates. In the present research, the physical and chemical characteristics of three types of biochar derived from banana leaves were investigated, which is a poorly studied raw material and is considered an agricultural waste in some Latin American, Asian, and African countries. The characterization of non-modified biochar samples pyrolyzed at 300, 400, and 500 °C was carried out through pH, scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and specific surface area measurements. The adsorption properties of banana leaf-derived biochar were evaluated by ammonium ion adsorption experiments. The results demonstrated that the pyrolysis temperature has a large impact on the yield, structure, elemental composition, and surface chemistry of the biochar. Biochar prepared at 300 °C is the most efficient for NH4+ adsorption, achieving a capacity of 7.0 mg of adsorbed NH4+ on each gram of biochar used, while biochar samples prepared at 400 and 500 °C show lower values of 6.1 and 5.6 mg/g, respectively. The Harkins–Jura isotherm model fits the experimental data best for all biochar samples, demonstrating that multilayer adsorption occurs on our biochar.
Terjedelem/Fizikai jellemzők:25
ISSN:1996-1944