Using geophysical log data to predict the fracture density in a claystone host rock for storing high-level nuclear waste

Previously drilled boreholes of a host rock for a potential nuclear waste repository in Hungary revealed a highly fractured claystone rock body. A crucial step for characterizing the hydrodynamic behavior of such a fractured reservoir is fracture identification and accurate calculation of the fractu...

Teljes leírás

Elmentve itt :
Bibliográfiai részletek
Szerzők: Tóth Emese
Hrabovszki Ervin
M. Tóth Tivadar
Dokumentumtípus: Cikk
Megjelent: 2023
Sorozat:ACTA GEODAETICA ET GEOPHYSICA 58 No. 1
Tárgyszavak:
doi:10.1007/s40328-023-00407-w

mtmt:33698292
Online Access:http://publicatio.bibl.u-szeged.hu/27167
LEADER 02155nab a2200241 i 4500
001 publ27167
005 20230512102832.0
008 230512s2023 hu o 0|| Angol d
022 |a 2213-5812 
024 7 |a 10.1007/s40328-023-00407-w  |2 doi 
024 7 |a 33698292  |2 mtmt 
040 |a SZTE Publicatio Repozitórium  |b hun 
041 |a Angol 
100 1 |a Tóth Emese 
245 1 0 |a Using geophysical log data to predict the fracture density in a claystone host rock for storing high-level nuclear waste  |h [elektronikus dokumentum] /  |c  Tóth Emese 
260 |c 2023 
300 |a 35-51 
490 0 |a ACTA GEODAETICA ET GEOPHYSICA  |v 58 No. 1 
520 3 |a Previously drilled boreholes of a host rock for a potential nuclear waste repository in Hungary revealed a highly fractured claystone rock body. A crucial step for characterizing the hydrodynamic behavior of such a fractured reservoir is fracture identification and accurate calculation of the fracture density. Although acoustic borehole televiewers provide a reliable base for determining the fracture density, older boreholes usually lack such data. However, conventional borehole geophysical measurements are often accessible in such cases. The aim of this study was to identify any correlations between well log data and fracture density. Multiple linear regression analysis was performed on data from two boreholes penetrating the Boda Claystone Formation in southwest Hungary. The upper section of the BAF-4 borehole was used for training, where the fracture density was estimated with a fit of R 2 = 0.767. The computed regression function predicted the fracture density with high accuracy in both boreholes for all intervals with typical lithological features. However, in some sections where anomalous well log data indicated changes in the lithology, the prediction accuracy decreased. For example, the function underestimated the fracture density in sandy intervals. 
650 4 |a Föld- és kapcsolódó környezettudományok 
700 0 1 |a Hrabovszki Ervin  |e aut 
700 0 2 |a M. Tóth Tivadar  |e aut 
856 4 0 |u http://publicatio.bibl.u-szeged.hu/27167/1/s40328-023-00407-w.pdf  |z Dokumentum-elérés