The development of fly ash red mud based geopolymer /

Taking into account environmental considerations, such as decreasing CO2 emission and the ecological footprint, the utilisation of secondary raw materials is essential for sustainable development. Fly ash is the product of coal combustion plants that is collected by various air cleaning equipment fr...

Teljes leírás

Elmentve itt :
Bibliográfiai részletek
Szerzők: Mucsi Gábor
Szabó Roland
Ambrus Mária
Kovács Balázs
Dokumentumtípus: Cikk
Megjelent: 2018
Sorozat:Review of faculty of engineering : analecta technica Szegedinensia 12 No. 1
Kulcsszavak:Polimerek, Vörösiszap, Kémia
doi:10.14232/analecta.2018.1.30-38

Online Access:http://acta.bibl.u-szeged.hu/56788
LEADER 02373nab a2200241 i 4500
001 acta56788
005 20210126151301.0
008 190109s2018 hu o 0|| zxx d
022 |a 2064-7964 
024 7 |a 10.14232/analecta.2018.1.30-38  |2 doi 
040 |a SZTE Egyetemi Kiadványok Repozitórium  |b hun 
041 |a zxx 
100 1 |a Mucsi Gábor 
245 1 4 |a The development of fly ash   |h [elektronikus dokumentum] :  |b red mud based geopolymer /  |c  Mucsi Gábor 
260 |c 2018 
300 |a 30-38 
490 0 |a Review of faculty of engineering : analecta technica Szegedinensia  |v 12 No. 1 
520 3 |a Taking into account environmental considerations, such as decreasing CO2 emission and the ecological footprint, the utilisation of secondary raw materials is essential for sustainable development. Fly ash is the product of coal combustion plants that is collected by various air cleaning equipment from flue gas, and red mud is the by-product of the Bayer-process, through which alumina can be produced from bauxite. Geopolymerisation is a process that is suitable for the utilisation of such wastes to produce ceramics, cement, concrete etc. with many advantageous properties. The main objective of the article is to present data on the development and examination of geopolymer made out of deposited fly ash from Tatabánya and red mud from Almásfüzitő. During the experiments, red mud was added to previously optimised fly ash geopolymer in various quantities and compressive strength tests were carried out to determine the optimal fly ash and red mud ratio. However, as the cracking of the specimens could be observed, further tests were carried out on the durability of the geopolymers. The effect of the sealing conditions and RM calcination was investigated, both via visual inspection and with FT-IR analysis at the ages of 3, 7, 14, 28 and 90 days. Based on the results, it could be concluded that the sealing conditions have direct effect on the structural characteristics of fly ash – red mud based geopolymers, but further experiments should be carried out for the identification of the ongoing reactions. 
695 |a Polimerek, Vörösiszap, Kémia 
700 0 1 |a Szabó Roland  |e aut 
700 0 1 |a Ambrus Mária  |e aut 
700 0 1 |a Kovács Balázs  |e aut 
856 4 0 |u http://acta.bibl.u-szeged.hu/56788/1/engineering_2018_001_030-038.pdf  |z Dokumentum-elérés